Hytera DIGITAL MOBILE RADIO, Руководство пользователя

Страница: 28 / 40

23
Service Operation
To send private calls/group
calls on the digital channel.
Press the One Touch Cal l key
and then hold down the PTT
key.
● To send calls on the analog
channel.
● To send messages.
● To make control services
on the digital channel.
Press the One Touch Call key.
Telemetry
This feature allows you to remotely supervise the device
connected with a radio. With this feature, you can control the
device and view its status in the case that you are away from the
device.
The method for supervising the device is programmable by your
dealer. The available methods are:
● To supervise the device via the radio
If a device is connected with a radio, you can use another radio
to supervise the device. All the radios involved should be
configured with the Telemetry feature. For example, the
dealer enables the Telemetry feature for both Radio A and
Radio B, and assigns the Telemetry feature to the
P1 key on
Radio A. To supervise the device C, connect it with Radio B,
and press the
P1 key on Radio A.
● To supervise the device via a third-party software
If the Telemetry feature is enabled for the radio by your
dealer, you can supervise the device connected with the
radio via a third-party software.
Roam
This feature allows the radio to communicate between sites
in the IP Multi-site Connect system. If enabled, the radio can
communicate via any site in the IP Multi-site Connect system,
thus ensuring seamless communication in the system.
Operation:
Go to “Menu -> Roaming”, and select “On” or “Off”.
Press the programmed
Roam key to enable or disable the
feature.
Lone Worker
This feature is ideal for persons who work lonely. If you encounter
an incident and cannot operate your radio within the preset time
period, your radio will alarm automatically to summon help from
your companion.
Operation:
1. To enable the feature,
● Go to “Menu -> Settings -> Radio Set-> Lone Worker” and
select “Enable”; or
● Press the programmed Lone Worker key (a high-pitched tone
sounds); or
● Turn on the radio if the feature is enabled via the programming
software.
Functions and Operations