background image

1

Icon Information 

The following icons are available through this manual: 

Caution:

 indicates situations that could cause damage to your repeater or bodily 

injury.  

Note: 

indicates tips that can help you make better use of your repeater. 

*

Indicates functions or parts that are not supported by the current version of the repeater,

but will be available to future versions. 

Copyright 

Information

   

Hytera and HYT are the trademark or registered trademark of Hytera Communications 

Co., Ltd in PRC and other countries and/or areas. Hytera retains the ownership of its 

trademarks and product names. All other trademarks and/or product names that may be 

used in this manual are properties of their respective owners.   

The Hytera product described in this manual may include Hytera computer programs 

stored in memory or other media. Laws in the PRC and/or other countries or areas 

preserve for Hytera exclusive rights for Hytera computer programs. The purchase of this 

product shall not be deemed to grant, either directly or by implication, any rights to the 

purchaser with respect to Hytera computer programs. Any Hytera computer programs 

may not be copied, modified, distributed, decompiled, or reverse-engineered in any 

manner without the prior written consent of Hytera.   

Disclaimer   

Hytera endeavors to achieve the accuracy and completeness of this manual, but no 

warranty of accuracy or reliability is given. All the specifications and designs are subject to 

change without prior notice due to continuous technology development. No part of this 

manual may be copied, modified, translated, or distributed in any manner without the 

express written permission of Hytera.   

If you have any suggestions or would like to learn more details, please visit us at: 

http://

www.hytera.cn. 

 

Содержание CHU-P0BA00































Отзывы: