Hytek TA3A.B, Технические данные инструкция

Страница: 7 / 12

S826/6
DIPSWITCH SETTINGS DIAGRAM
EXTERNAL RELAY OUTPUTS
9. Where external output relays have been fitted connect external cabling
as per connections diagram. The relay contacts are rated at 250 volts, 5
amps / 100VA max.
NB: The relays are a switch only and do not offer a power source for
any external equipment. The relays MUST NOT be used to activate any
equipment such as fuel pumps or safety valves.
COMPLETION OF INSTALLATION
10. Install batteries provided (TA3A.B & TA3A.BR Only).
11. Refit lid to alarm box ensuring that ribbon cable is reconnected to the
main PCB and the lid seal is in place.
12. Switch on power. The green "POWER" LED should illuminate
(TA3A.P, TA3A.PR only).
OPERATION
(HIGH LEVEL) (LOW LEVEL)