21
on LCD disappears.
VOX Feature
Plug an earphone into the radio. In the menu mode, turn the VOX feature on to enable
VOX feature. The VOX feature enables you to transmit automatically by speaking into
the microphone.
1. Transmission starts automatically when you start speaking and stops automatically
when you stop speaking.
2. Press the PTT button to disable the VOX feature.
The VOX feature will be reactivated after switching the power off and then back on.
Low Battery Alert
When the battery voltage becomes low, the red LED will flash and a beep sound is
heard. At this time, the battery should be replaced or recharged.
2-Tone/HDC1200 Selective Call
The radio can call selected radios if selective call feature is enabled. Selective call
signalling includes 2-Tone and HDC signalling.
2-Tone
Press the Selcall key or go to the required 2-Tone signalling in Call List and press the
PTT key to transmit.
The radio enters call waiting mode when transmission ends or at receiving a valid
selective signalling. The LED flashes orange in call waiting mode. The radio will exit
from the call waiting mode when the call waiting reset time elapses, the MONI key is
pressed, or when the channel selector knob is rotated.
Please refer to your dealer for details.
HDC1200
Send a Selective Call
You can send a selective call to another radio or a radio group if your radio supports this
function
To send a selective call
1. Press or shortcut key "SelCall” to enter menu mode (the channel should be
defined with HDC1200).
