19
Please contact your dealer for more details about callback channel.
Nuisance Channel Delete
Nuisance channel delete feature allows you to temporarily delete an unwanted channel
from the scan list.
When the radio stops on the nuisance channel, press the programmed “nuisance delete”
key until an alert tone sounds to delete this channel.
When scan feature is enabled again, the deleted channel will return to the scan list.
Note: Priority channel cannot be deleted.
Priority Channel Scan
This feature allows you to scan important channels. The dealer can program a channel
as priority channel through the programming software.
Note: The radio will constantly monitor the priority channel when it stops on a
non-priority channel. If activity is detected on the priority channel, the radio will revert to
the priority channel and remain there as long as the channel stays active.
Please contact your dealer for more details.
Call
Press the programmed call key and the radio will send a preprogrammed signaling code
to compatible receivers with the same code. The compatible receiver sounds an alert
tone to draw the user’s attention.
Emergency ANI/Emergency Alert
The radio can be programmed to transmit an emergency ANI or emergency alert. ANI
can be DTMF or five-tone (set by your dealer).
If emergency alert is enabled, the radio will sound an audible alert at high volume.
1. Press the Emergency Alert key to enable Emergency Alert feature.
2. Press and hold the Emergency Alert key to disable Emergency Alert feature.
If the radio is programmed to transmit emergency ANI, press emergency key and then:
1. The radio transmits emergency ANI on the preprogrammed emergency channel. The
times of transmission and the interval time between every two transmission can be
set by your dealer.
2.
The radio can receive signals during the interval time.
