14
When activities are detected on a channel, the radio
will stay on the channel to receive current activities
and the LED glows green.
If you don’t want to hear activities on the channel,
press the programmed
Nuisance Temporar y
Delete
key to remove the channel from the scan list
temporarily, or the programmed
Nuisance Channel
Delete
key to remove the channel from the scan list
permanently.
3. To exit the scanning process, press the programmed
Scan key again. Besides the above method, you can
exit scanning in the following ways:
Switch to a channel without a scan list, or switch to a
channel with the feature “Auto Scan” disabled.
Press one of the programmed
Call 1-Call 5
keys.
The Stun code is received.
Enable the Emergency function.
Turn the radio off.
●
●
●
●
●
●
●
Functions and Operations
Note: You can request your dealer to create a scan list
for each channel. Each list may contain 16 channels at
most. You can delete a channel from the scan list only
when there are more than 2 channels in the scan list.
Emergency
In case of an emergency, you can use this feature to ask
for help from your companion or the control center. In all
cases, this feature enjoys the highest priority.
1. Emergency Start
The feature can be enabled via the following methods:
Press the programmed
Emergency
key.
Activate Emergency in Lone Worker mode (please
see "Lone Worker” on Page 17 for details).
Activate Emergency in Man Down mode (please see
“Man Down” on Page 17 for details).
2. Emergency Exit
To exit the emergency mode, the following methods are
available:
Long press the
Emergency
key.
The preset Emergency Exit command is received.
The preset emergency cycles expire.
Place the radio upright if the Emergency is activated
in Man Down mode.
Turn the radio off.
●
●
●
●
●
●
●
●
