Hyster J30XNT, Руководство по эксплуатации

Страница: 187 / 226

How to Make Checks With the Key or Keyless
Switch ON
WARNING
FASTEN YOUR SEAT BELT! The seat belt is installed to
help the operator stay on the truck if the lift truck tips
over. IT CAN ONLY HELP IF IT IS FASTENED.
After completing the How to Make Checks With the Key
or Keyless Switch OFF , perform the How to Make
Checks With the Key or Keyless Switch ON before plac-
ing the lift truck into service.
Make sure the area around the lift truck is clear before
moving the lift truck. Be careful when making the checks.
Control Levers and Pedals
Check that the levers for the mast and attachment operate
as described in
Model Description section of this manual.
The brake pedals are checked as described in the Service
Brakes and Automatic Parking Brake paragraphs with
the operation of the brakes.
Direction and Speed Control Pedals
Check that the direction and speed control pedals operate
as described in the
Model Description section of this man-
ual. Lubricate the MONOTROL® pedal or accelerator pedal
joints as needed. See the
Maintenance Schedule .
Electrical Components
1. Check the operation of the horn by pressing the horn
button on the steering wheel. The horn will operate when
the key or keyless switch is in any position. If lift truck is
equipped with E-Hydraulic controls, there is another horn
button located on the armrest. See
Figure 8 , Figure 9 , and
Table 1 .
There is also a handle with a horn button on the right over-
head guard leg. See the
Model Description section and
Table 1 .
2. If lift truck is equipped with lights, check the operation of
the lights using the appropriate rocker switch, located on
the right side of the steering column. See
Figure 8 , Fig-
ure 9 , and Table 1 . The lights will operate when the key or
keyless switch is in any position.
Maintenance
185
Property of American Airlines