Hyster H170FT, Руководство по обслуживанию и ремонту

Страница: 10 / 21

CLEAN
WARNING
Cleaning solvents can be flammable and toxic and
can cause skin irritation. When using cleaning
solvents, always follow the solvent manufac-
turer’s recommended safety procedures.
WARNING
Compressed air is used for cleaning or drying
purposes, or for clearing restrictions. Wear pro-
tective clothing (goggles/shield, gloves, etc.) to
avoid injury to personnel.
1.
Clean bearings by placing them in a wire bas-
ket and immersing in a container of fresh sol-
vent. Agitate the bearings in the solvent to re-
move all traces of old lubricant.
2.
After cleaning the bearings, dry them with
clean compressed air. Take care to prevent
spinning the bearings when using a compressed
air jet.
3.
Immediately wrap bearings in a lint-free cloth
to protect them from dust and other foreign
matter.
1. CAPSCREW
2. WASHER
3. MOUNTING PLATE
4. PLUG
5. FRAME MOUNT
6. STEERING AXLE HYDRAULIC LINES
7. STUB SHAFT
Figure 3. Steering Axle, Remove
Steering Axle Assembly Repair 1600 SRM 1952
4