General
2200 SRM 1324
DASH DISPLAY MENU ACCESS (METAL
HANDLE OPTION)
Startup the lift truck in service mode to access the
dash display menu system:
1.
Remove the drive unit compartment covers to ac-
cess the control module.
2.
Depress and HOLD the #3 switch (located on
the control module inside the electrical compart-
ment). See Figure 3.
3.
Turn the key switch to the ON position.
4.
Continue holding the #3 switch and press the
HORN switch (located on top of the control han-
dle) within 1 second of turning the key switch.
5.
Release the #3 and horn switches.
1.
#1 BUTTON
2.
#2 BUTTON
3.
#3 BUTTON
4.
#4 BUTTON
Figure 3. Control Module
The Enter Password screen will now appear on the
LCD. At the Enter Password screen, enter your five-
digit Technician password. See Figure 4.
To enter your password at the Enter Password
screen, enter the appropriate digit in the highlighted
area of the display. Use the #1 switch to increase
the number to any digit between 1 and 5. Use the #2
switch to decrease the number.
NOTE:
As an alternative to using the control module
buttons, the lift and lower buttons on the steer han-
dle itself can be used to increase and decrease the
values of the digits, respectively.
Use the #4 switch to move to and highlight the next
digit to be entered. Use the #3 switch to return to
and highlight a previous entry. Repeat until all five
digits of your password have been entered. While
on the final digit, press the #4 switch to enter the
password. Upon successful entry of your technician-
level password, you will be directed to the Technician
Menu.
Figure 4. Enter Password Screen
2
