Hyster A099, Руководство по устранению неисправностей

Страница: 49 / 68

a. All components removed for replacement, test
or access purposes have been correctly rein-
stalled.
b. All electrical connections are restored.
c. If operational test or checkout is to be per-
formed, make sure operating area is free of
personnel, obstructions, and ground hazards.
d. Vehicle is in proper location and configuration
for safe operation.
e. Support equipment and tools are removed and
properly stored.
f. If operation is complete and the lift truck is to
be stored or shut down, verify:
(1) Mast/Carriage/Forks are properly posi-
tioned.
(2) By pushing the emergency disconnect
switch down until it clicks, disconnects the
power supply to the lift truck.
(3) Cab (if equipped) is closed and secured.
1. PLUG TYPE CONNECTOR BODY
2. RECEPTACLE TYPE CONNECTOR BODY
3. CAVITY PLUG
4. PIN-TYPE TERMINAL
5. SECONDARY LOCK
6. SOCKET TYPE TERMINAL
Figure 9030-03-1. Typical DT Series Connector
Electrical System General Maintenance and Diagnostic Data
Check the Service Manual section in Hypass Online for possible updates and check pertinent Grams
Confidential/Proprietary - Do Not Copy or Duplicate 9030-03-3