The traction motors vary depending upon the configu-
ration of your forklift. Lift truck model D203 uses a
traction motor vertically mounted to the drive unit. The
drive unit is refered to as the Master Drive Unit
(MDU). For further information on the MDU see MAS-
TER DRIVE UNIT. The model designation K160,
A935, A276 and A970 use two traction motors and
two motor controllers. A motor is mounted to a drive
unit on each side of the vehicle and powers the drive
tires. The speed sensor for these motors is physically
located on the drive unit housing, not on the motor.
See Figure 9025-10-1.
1.
TRANSMISSION
2.
PARKING BRAKE WIRE HARNESS
3.
SOCKET HEAD CAPSCREW
4.
LOCKWASHER
5.
WASHER
6.
PARKING BRAKE
7.
TRACTION MOTOR
8.
SPLINED HUB
9.
SNAP RING
10. WOODRUFF KEY
11. TRACTION MOTOR MOUNTING CAPSCREW
Figure 9025-10-1. Transaxle Assembly J1.5-2.0XNT (J30-J40XNT) (K160) J1.6-2.0XN (A935)
Principles of Operation
Traction Motor
Check the Service Manual section in Hypass Online for possible updates and check pertinent Grams
9025-10-2
Confidential/Proprietary - Do Not Copy or Duplicate
Содержание A099
Страница 1: ...Hyster A276 J45XN J50XN J60XN J70XN Forklift...
Страница 14: ...9010 2...
Страница 28: ...NOTES 9010 05 14...
Страница 30: ...9025 2...