23
EC Declaration of Incorporation
Manufacturers Name:
Pentair Flow Technologies, LLC
Manufacturers’ Address:
375 Fifth Avenue NW,
New Brighton, MN 55112, USA
Declare that the partially complete machinery described below conforms to applicable health and safety
requirements of Parts 1 of Annex I of Machinery Directive 2006/42/EC. This partly completed machinery
must not be put into service until the equipment into which it is to be incorporated has been declared in
conformity with the provisions of this directive. Confidential technical documentation has been compiled as
described in Annex VII Part B of Machinery Directive 2006/42/EC and is available to European national
authorities on written request. If a request is received, documentation will be transmitted either
electronically or by post. Clauses 1.1.4, 1.1.7, 1.1.8 Section 1.2, Clauses 1.3.5, 1.3.6, 1.3.7, 1.3.8.1, 1.3.8.2, 1.3.9,
1.4.1, 1.4.2.1, 1.4.2.2, 1.4.2.3, 1.4.3, 1.5.2, 1.5.7, 1.5.12, 1.5.14, 1.5.16, 1.6.2, 1.7.1.1, 1.7.1.2, 1.7.2, and 1.7.4.2 are
clauses of Machinery Directive 2006/42/EC that have not been met, but could be applicable and must be
addressed during installation by a third party.
Description:
PENTAIR Pump
Type:
Roller Pumps
Series Numbers
1502, 1700, 4001, 4101, 6500, 7560, 7700
Type:
Centrifugal Pumps
Series Numbers
1442P, 1539, 1540, 1550, 90XX, 9202, 9203, 9205, 9206, 9208, 9262,
9263, 9253, 9302, 9303, 9305, 9306, 9307, 9308, 9313, 9314, 9316, 9742P
Type:
Piston/Plunger Pumps
Series Numbers
5315C, 5320C, 5321C, 5322C, 5324C, 5325C, 5330C, 53702, 53703
The following standards have either been referred to or been complied with in part or in full as relevant:
ENISO 12100
Machinery Safety - General principles for design - Risk assessment and risk reduction
EN809-1998 + A1 2009
Machinery Safety - Pumps and pump units for liquids - Common safety requirements
EN ISO 13732-1
Machinery Safety - Ergonomics of the thermal environment
EN ISO 3744:2010
Acoustics
- Determination of sound power levels and sound energy levels of
noise sources using sound pressure
EN ISO 11202/A1 1997
Machinery Safety - Noise emitted by machinery and equipment
EN 12162:2001+A1:2009 Machinery Safety - Liquid pumps - Safety requirements -Procedure for hydrostatic
testing
EN ISO 4254-6:2009
Machinery Safety - Sprayers and liquid fertilizer distributors
97-68-EC + 2010/26/EU
Gas Emission
- Non-road gas emissions
Name .……………...…………………………………………… Position …..……………………….…..………
Signature …………………………………………..……………. Date …..……..………………………..……….
Place of Signing…………………………………………………………………………………………………….…..
Rev 10/11/16
Содержание 5315C Series
Страница 22: ...Notes...
