Hypro 5315C Series, Оригинальное руководство пользователя

Страница: 12 / 24

- 12 -
• For pumps with gas engines, the exhaust must be directed away from operators and anyone standing nearby to
ensure that exhaust fumes do not enter their breathing zone.
• If a rigid plumbing system is to be used on a Hypro Piston pump the system must be properly aligned with the
inlet and outlet ports.
• When installing, adjusting or removing a Hypro Piston pump ensure that there are no objects which can fall on the
installer and make certain that all machinery to which the pump is to be attached is turned off.
• Pumps must be installed in a location where they are accessible for any necessary maintenance.
• When a main electrical supply is needed to power electric drive motors installers are responsible for ensuring that
a supply disconnect device capable of isolating the machine from its electricity supply should be provided.
Standard Mounting
• In order to prevent injury or damage to property all Hypro pumps should be properly mounted to a solid base where
there is no danger of the pump falling or breaking loose. All Hypro pumps come with mounting base which allow the
pump to be secured. When mounting your Hypro Piston pump be sure to use bolts and nuts which are compatible
with any chemicals that may come into contact with them as well as choosing the correct grade of bolt based on the
pump weight and any expected loads.
Pump Plumbing
• Pump inlet and outlet lines should be at least the same size as their respective port. Pump plumbing must be capable
of withstanding the maximum suction, and pressure, generated by the pump and should have as few restrictions as
possible.
Plumbing Diagram
IN
OUT
Pulsation
Dampener
Inlet
Pressure
Regulator
Compound
Gauge
Pump
Filled
Pressure
Gauge
Bypass Back to Inlet
Unloader
Valve
Spray
Gun
Nozzle
Line
Strainer