Hypertherm Powermax 65, Руководство оператора

Страница: 7 / 156

TAble OF CONTeNTS
powermax
65/85
Operator Manual
iii
WARRANTY
Hypertherm
iii
4-08
Attention
Genuine Hypertherm parts are the factory-
recommended replacement parts for your
Hypertherm system. Any damage caused by the
use of other than genuine Hypertherm parts may
not be covered by the Hypertherm warranty.
You are responsible for the safe use of the
Product. Hypertherm does not and cannot make
any guarantee or warranty regarding the safe
use of the Product in your environment.
General
Hypertherm, Inc. warrants that its Products shall
be free from defects in materials and workman -
ship, if Hypertherm is notified of a defect (i) with
respect to the power supply within a period of
two (2) years from the date of its delivery to you,
with the exception of Powermax brand power
supplies, which shall be within a period of three
(3) years from the date of delivery to you, and
(ii) with respect to the torch and leads within a
period of one (1) year from its date of delivery to
you, and with respect to torch lifter assemblies
within a period of one (1) year from its date of
delivery to you, and with respect to laser heads
within a period of one (1) year from its date of
delivery to you. This warranty shall not apply to
any Powermax brand power supplies that have
been used with phase converters. In addition,
Hypertherm does not warranty systems that
have been damaged as a result of poor power
quality, whether from phase converters or
incoming line power. This warranty shall not
apply to any Product which has been incorrectly
installed, modified, or otherwise damaged.
Hypertherm, at its sole option, shall repair,
replace, or adjust, free of charge, any defective
Products covered by this warranty which shall
be returned with Hypertherm’s prior
authorization (which shall not be unreasonably
withheld), properly packed, to Hypertherm’s
place of business in Hanover, New Hampshire,
or to an authorized Hypertherm repair facility, all
costs, insurance and freight pre paid.
Hypertherm shall not be liable for any repairs,
replacement, or adjustments of Products
covered by this war ranty, except those made
pursuant to this paragraph or with Hypertherm’s
prior written consent. The warranty above is
exclusive and is in lieu of all other
warranties, express, implied, statutory, or
otherwise with respect to the Products or
as to the results which may be obtained
therefrom, and all implied war ranties or
conditions of quality or of merchantability
or fitness for a particular purpose or
against infringement. The foregoing shall
constitute the sole and exclusive remedy
for any breach by Hypertherm of its
warranty. Distributors/OEMs may offer different
or additional warranties, but Distributors/OEMs
are not authorized to give any additional
warranty protection to you or make any
representation to you purporting to be binding
upon Hypertherm.
Certification test marks
Certified products are identified by one or more
certification test marks from accredited testing
laboratories. The certification test marks are
located on or near the data plate. Each
certification test mark means that the product
and its safety-critical components conform to
the relevant national safety standards as
reviewed by that testing laboratory. Hypertherm
places a certification test mark on its products
only after that product is manufactured with
safety-critical components that have been
authorized by the accredited testing laboratory.
Once the product has left the Hypertherm
factory, the certification test marks are
invalidated if any of the following occurs:
• The product is significantly modified
in a manner that creates a hazard or
non-conformance.
• Safety-critical components are replaced with
unauthorized spare parts.