manualshive.com logo in svg

Hypertherm Powermax 65, Руководство оператора

Поделиться
Скачать
Hypertherm Powermax 65 Скачать руководство пользователя страница 115

OPeRATION

powermax

65/85

 

Operator Manual

 

4-15

Understanding duty-cycle limitations

The duty cycle is the amount of time, in minutes, that a plasma arc can remain on within a 

10-minute period when operating at an ambient temperature of 104° F (40° C).

With a Powermax65:

•  At 65 A, the arc can remain on for 5 minutes out of 10 minutes without causing the unit to 

overheat (50% duty cycle).

•  At 59 A, the arc can remain on for 6 minutes out of 10 (60%)
•  At 46 A, the arc can remain on for 10 minutes out of 10 (100%).

With a Powermax85:

•  At 85 A, the arc can remain on for 6 minutes out of 10 minutes without causing the unit to 

overheat (60% duty cycle).

•  At 74 A, the arc can remain on for 8 minutes out of 10 (80%)
•  At 66 A, the arc can remain on for 10 minutes out of 10 (100%).

If the duty cycle is exceeded, the power supply overheats, the temperature fault icon appears in the 

status screen, the arc shuts off, and the cooling fan continues to run. You can not resume cutting 

until the temperature fault icon disappears and the fault LED goes off.

Содержание Powermax 65





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды