Hypertherm EcoSift, Руководство оператора

Страница: 35 / 188

Prod
uct description
Product description
EcoSift Operator Manual 809500 35
The EcoSift hopper (6) holds wet used abrasive. A pump (8) pulls that wet abrasive into the EcoSift unit.
The distribution head (9) deposits the wet abrasive onto the primary screen (10). Clean water from the nozzles on
the distribution head flushes away debris and small particles that are too small for recycling.
A shaker vibrates wet abrasive on the primary screen. Waste water and abrasive particles fall through the primary
screen and are routed to the waste hopper (18). The shaker sends abrasive that is large enough to recycle to the
top of the dryer box (11). The dryer box contains heating elements and a blower to remove moisture from the
abrasive.
The clean abrasive moves from the dryer box to the secondary screen (12), which vibrates to isolate the good
abrasive from debris and abrasive particles that are too large to be reused. The debris and large particles fall into a
waste container (14). Clean, dry abrasive passes through the secondary screen and into a recycled-abrasive
collection bag (13).
The recycled-abrasive collection bag stays on a pallet, which is on a scale. The scale display shows the weight of
the abrasive in the recycled-abrasive collection bag.
The dust collector (17) pulls hot air and abrasive particles from the top of the dryer box. Clean water carries the
particles to the waste hopper (18).