Hypertherm EcoSift, Руководство оператора

Страница: 109 / 188

Preventi
ve maintenance
Preventive maintenance
EcoSift Operator Manual 809500 109
Start the EcoSift after maintenance
Turn
ON
the EcoSift. Refer to
Turn ON the EcoSift
on page 47.
Long-term storage
1. Disassemble the EcoSift.
2. Clean and dry all of the parts.
3. Use compressed air to blow water out of the hoses.
4. Lubricate parts that can oxidize.
5. Put the system on a pallet.
6. Wrap the pallet and the EcoSift with plastic.
The recommended storage temperature is -25.0°C to 55.0°C (-13°F to 131°F).
WARNING
Only approved personnel can operate, maintain, and repair this machinery. Refer to
Training
on
page 67 for more information.
WARNING
Do not operate this machinery without the access covers and all other safety devices installed. Do
not remove guards while the unit is operating.
WARNING
Wear approved personal protective equipment such as goggles, gloves, and respirators when
operating or working near this machinery. Refer to
Personal protective equipment
on page SC-20.
CAUTION
If a water line, a fitting, a hose, or a valve might be frozen, do not operate the system. Thaw the
system until water moves freely through the entire water circuit.
Remove all tools and materials from the work area before starting the machine.
Repair or replace parts identified in the preventive maintenance schedule or if the parts are
defective, deteriorated, corroded, or damaged.
WARNING
• Lifting must be done by a trained operator.
• Obey all work site-safety requirements, the safety instructions for the lifting equipment, and the
safety information in this manual.
• Misuse of lifting equipment can cause the load to become unstable, which can cause property
damage, personal injury, or death.
CAUTION
Do not store outdoors or in areas with high humidity