Hypertherm Abrasive Regulator II, Инструкция по эксплуатации

Страница: 27 / 43

Abrasive Regulator II
Instruction
Manual 809030
27
Preventive maintenance
Preventive mainte
na
n
ce
Assemble the regulator

The exit plate is thicker than the sandwich plate.
1. Put the exit plate on the housing base under the gate.

Put the face with THIS SIDE UP toward the housing base. Put the end with THIS END TOWARDS KNOB
toward the knob on the housing base.
2. Put the aperture plate between the exit plate and the gate.
Before reassembling the regulator, clean the parts with compressed air to remove dirt and other
contaminants.
1 2
3
4
1
Gate
2
Sandwich plate
3
Aperture plate
4
Exit plate
2
1
1
Gate
2
Exit plate
2
1
1 Gate 2 Aperture plate