Hypertherm Abrasive Regulator II, Инструкция по эксплуатации

Страница: 11 / 43

Safety and compliance
SC-11
Sa
fe
ty
Safety
National and local safety regulations
National and local safety regulations shall take precedence over instructions supplied with the product. The product
shall be imported, installed, operated, and disposed of in accordance with national and local regulations applicable to
the installed site.
User responsibilities
The end user is responsible for the safe operation of this equipment.
The safety precautions in this manual are general and can not anticipate every situation. Hypertherm Inc.
acknowledges that unforeseen situations due to equipment failure, site variability, insufficient maintenance, failure of
control equipment, and other events can cause equipment damage, injuries, or death. It is the user’s responsibility to
identify hazards and take the steps necessary to minimize risks.
Keep these instructions near the equipment. This manual is intended to familiarize the user with the equipment and its
parts, operation, and maintenance.
All people who operate or are exposed to this equipment must know this information:

Applicable safety standards
 The use, limitations, and care of personal protective equipment
 The location of the written hazard communication program and safety data sheets
User qualification and training
All users must read and understand these instructions before installing, operating, or doing maintenance on this
equipment.
Operators must be qualified to install, operate, and maintain this equipment. Training should include this information:

How to start and stop the equipment during routine operation and in an emergency situation
 The conditions and actions that can lead to injuries to people and damage to the equipment

How to operate all controls
 How to do maintenance procedures
 A copy of this manual
This list is not all-inclusive.
Specific safety messages are included in the relevant sections of this manual.