Hypertherm Abrasive pot, Инструкция по эксплуатации

Страница: 16 / 36

16 Safety and compliance
Symbols and marks
Symbol
s and marks
Symbols and marks found on the data plate and the equipment
Some symbols or marks in this table could apply to other products.
This symbol identifies a mandatory action.
This symbol identifies a prohibited action.
This symbol identifies tools or materials that are required or recommended for a procedure.
This symbol identifies a note or helpful information.
Correct direction of motor rotation (motor rotation arrow)
S/N Serial number
V Volts
Φ Number of phases in a power system
Hz Frequency (hertz)
FLA Full-load current (amperage)
SCCR Short-circuit current rating
IP Ingress protection rating
Imax
Primary motor maximum current draw (amperes)
kW
Primary motor power output (kilowatts)
l/min Maximum outlet flow rate (liters/minute)
MPa Maximum outlet water pressure (megapascals)
DWG System schematic drawing number
The Conformité Européene (CE) mark shows that a product complies with standards to the product
to which the mark is affixed.
The CE mark signifies the manufacturer’s declaration of conformity to applicable European
directives and standards. Only those versions of products with a CE mark found on or near the data
plate have been tested for compliance with the European Low Voltage Directive and the European
Electromagnetic Compatibility (EMC) Directive.