Hypertherm Abrasive pot, Инструкция по эксплуатации

Страница: 11 / 36

Safety and compliance 11
Environment
al stewardship
Environmental stewardship
Proper disposal of Hypertherm products
Hypertherm waterjet cutting systems, like all products with electronics, can contain materials or parts, such as
printed circuit boards, that can not be discarded with ordinary waste. It is your responsibility to dispose of
Hypertherm product or part in an environmentally suitable manner and in compliance with national and local codes.
In the United States, check all federal, state, and local laws. In the European Union (EU), check the EU directives,
national, and local laws. In other countries, check national and local laws. Consult with legal or other compliance
experts when applicable. For more information, go to
www.hypertherm.com/customer-support/product-service/recycling .
Proper handling and safe use of chemicals
Material safety data sheets (MSDS) and safety data sheets (SDS) are part of a hazard communication plan that
supplies detailed information about hazardous chemicals. The information includes the chemical’s toxicity and
reactivity, first aid for exposure, approved storage and disposal, recommended protective equipment, and
spill-handling procedures.
The Occupational Safety and Health Administration (OSHA) has presented new hazardous chemical labeling
requirements as a part of its recent revision of the Hazard Communication Standard (29 CFR 1910.1200), to align
with the United Nations’ Globally Harmonized System of Classification and Labelling of Chemicals (GHS). The
GHS is an international system for standardizing chemical classification and labeling.
Chemical regulations in the USA, Europe, and other locations require that Material Safety Data Sheets (MSDS) and
Safety Data Sheets (SDS) be made available for chemicals that are supplied with the product and chemicals used
in or on the product. This list of chemicals is supplied by Hypertherm.
To see MSDS and SDS:
1. Go to www.hypertherm.com .
1. Search for documents library .
2. Select Waterjet Family from the All dropdown list under Product/Product type.
3. Select Material Safety Data Sheets from the All Categories dropdown list.
These navigation instructions can change without notice.
Particle emission and wastewater quality
Hypertherm does not manufacture or supply the materials that are cut and has no knowledge whether the particles
released from materials that are cut will pose a physical hazard or health risk. Please consult with your supplier or other
technical advisor if you need guidance concerning the properties of the material you will cut using a Hypertherm
product.
If you are not fully aware of and up to date on all applicable government regulations and legal standards for the
installation site, consult a local expert before purchasing, installing, and operating the equipment.