HyperPAC™ User Manual
www.hypertech.com
Installing the HyperPAC™
Connect the Cables
With the key in the off position, connect one end of the provided cable to the port on the
lower right side of the HyperPAC™ (fig L). Locate the Data Link Connector (DLC) under
the driver’s side dash panel. Plug the HyperPAC™ cable into the DLC. Make sure the
cable is plugged in completely to ensure a good connection (fig M).
Figure L
Figure M
Route the cable up around the dash so as to not interfere with any accessories. DO
NOT wrap the cable around any accessories such as the parking brake lever, gear
selector, etc. Make sure any slack in the cable is located so that it doesn’t interfere with
the driver’s feet, pedals, or other moving objects.
• (901) 382-8888
Page 6 of 66
