HyperPAC™ User Manual
www.hypertech.com
After you enter the User Name the HyperPAC™ will request information from the
vehicle’s computer. The screen will display “Please Wait” while the screen is receiving
information.
After the vehicle information is verified the unit is ready to be locked to the vehicle
before allowing normal operation.
IMPORTANT - The HyperPAC™ can only be used on the vehicle that it is locked to.
Once the unit has been locked to a vehicle it must be sent back to the factory to be
unlocked before it can be connected to another vehicle.
Touch CONTINUE to lock the unit to the vehicle.
Touch CANCEL if you are not connected to the vehicle that you wish to install the
HyperPAC™ unit on.
Lock to Vehicle
HELP
CONTINUE
The HYPERpac is now ready to lock itself to
this vehicle.
CANCEL
VIN = 1FTPX14534NA97693
2004 Ford Truck F-150 4x2 5.4L triton -3 Valve
Calibration ID = RXAQ3G4.HEX
Doing this will allow all HYPERpac features to be
made available. This will permanently tie the
HYPERpac unit to this specific vehicle.
Touch CONTINUE to lock to this vehicle or
CANCEL to abort this process.
• (901) 382-8888
Page 12 of 66