HYC-TNS5310-C2 QIG V1.0.1
10
HYPERCABLE sarl 74 Avenue Paul Sabatier ZA de la Coupe 11.100 Narbonne Tel : +33 (0) 4 68 70 91 75 - cell : 06 82 82 38 73
Mail : [email protected] - N° SIRET : 384 007 894 00031 – Code TVA CEE: FR90384007894 -
www.hypercable.fr
Step 2:
To keep the DC wires from pulling loose, use a small flat-blade
screwdriver to tighten the wire-clamp screws on the front of the
terminal block connector.
Step 3:
Insert the terminal block connector prongs into the terminal
block receptor.
Step 4:
Check the SYS LED. If it is ON, the power connection is correct.
Figure 8: Connecting DC power cord
Connecting the DI/DO Relay Wires
Figure 9: Connecting DI/DO Relay Wires
