19
①
REAR BRAKE LEVER
The rear brake is applied by squeezing
the brake lever gently toward the handle
grip.
Rear brake be anxious about motorcycle
falling down when braking suddenly. The
brake lamp will come on when the lever is
squeezed.
②
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
◉“ � ”
Position : Flash the left turn sig-
nal lamp.
◉“ � ”
Position : Flash the right turn sig-
nal lamp.
③
“
“
PASS
”
”
SWITCH
Press the
“
PASS
”
switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the
“
”
(ON)
position, push the
“
PASS
”
switch to oper-
ate the head lamp high beam.
LEFT HANDLE SWITCH
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the
“
“
OFF
”
”
position after com-
pleting the turn or lane change.
CAUTION
Apply the brake lightly and with great
care on slippery surfaces to avoid
skidding.
WARNING
Do not operate when the dimmer switch
“
“
”
”
position.
CAUTION
Set the dimmer switch
“
“
”
”
when other
vehicle is running in front or against.
WARNING
④
DIMMER SWITCH
Change the direction of head lamp light.
◉“
”
: The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
◉“
”
: The head lamp low beam
come on.
⑤
HORN SWITCH
Press the switch to operate the horn.
�
�
�
�
�
R
a
l
l
y
1
0
0
영문내지
2005.10.5
1:15
PM
페이지19
001
PagePro
9100
300DPI
100LPI