20
⑤
STARTER SWITCH
Use this switch to operate the starting
motor.
With the ignition switch in the
“
”
(ON)
position, push the starter switch to start the
engine.
④
THROTTLE GRIP
Engine speed is controlled by position of
the throttle grip. Turn it toward you to
increase engine speed. Turn it away from
you to decrease the engine speed.
③
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle
grip.
Front brake be anxious about motorcycle
falling down when braking suddenly as disk
brake system. The brake lamp will come on
when the lever is squeezed.
Apply the brake lightly and with great
care on slippery surfaces to avoid skid-
ding.
WARNING
Avoid turning the throttle grip during
brakes.
WARNING
②
LIGHT SWITCH
◉“
”
: position
The head lamp, position lamp, meter
lamp, tail lamp and license plate lamp
come on.
◉“
●
”
: position
The head lamp, position lamp, meter
lamp, tail lamp and license plate lamp go
off.
Do not operate for the engine stop
switch is in the
“
“
”
”
position while dri-
ving at one
’
’
s pleasure.
WARNING
N O T E
If the front or rear brake lever is not
squeezed, the starting motor will not
rotate.
①
ENGINE STOP SWITCH
◉“
”
Position : Using when dangerous
condition of falling down during
drive and others or engine stop
suddenly. The ignition circuit is
off. The engine cannot start or
run.
◉“
”
Position : Using when need
operation of engine as drive and
others. The ignition circuit is on
and the engine can run.
RIGHT HANDLE SWITCH
� � �
�
�
R
a
l
l
y
1
0
0
영문내지
2005.10.5
1:15
PM
페이지20
001
PagePro
9100
300DPI
100LPI