HYOSUNG Comet 250 FI, Руководство пользователя

Страница: 65 / 78

64
2. Loosen the rear axle
①
.
3. Carefully position a jack or block under
engine and raise until the rear wheel is
slightly off the ground.
4. Draw out the rear axle shaft.
5. Pull the rear wheel assembly rear
ward.
6. To replace the wheel, reverse the
complete sequence listed.
A hot muffler can burn you.
The muffler will be hot enough to burn
yor for some time after stopping the
engine.
Wait until the muffler cools to avoid
burns.
WARNING
2. Loosen the four front axle pinch bolts
①
(right and left).
3. Loosen the front axle ② .
4. Carefully position a jack or block under
engine and raise until the front wheel is
slightly off the ground.
5. Draw out the axle shaft.
6. Slide the front wheel forward.
7. To reinstall the wheel assembly,
reverse the sequence as described.
Improper jacking may cause damage to
the oil filter.
Do not apply the jack head to the oil filter
when jacking up the motorcycle.
CAUTION
�
�
�
● ●
REAR TIRE REPLACEMENT
1. Place the motorcycle on the jack or
block.
�
◉ ◉
TIRE REPLACEMENT
● ● FRONT TIRE REPLACEMENT
1. Place the motorcycle on the jack or
block.
GT250‡»` 2008.7.18 4:13 PM ˘ ` 64 JINSUN 300DPI 100LPI W