HYOSUNG Comet 250 FI, Руководство пользователя

Страница: 44 / 78

43
When climbing steep hills, the motorcycle
may begin to slow down and show lack of
power. At this point you should shift to a
lower gear so that the engine will again be
operating in its normal power range. Shift
rapidly to prevent the motorcycle from
losing momentum.
When riding down a steep hill, the engine
may be used for braking by shifting to a
lower gear.
Be careful, however, not to allow the
engine to overrev.
RIDING ON HILLS STOPPING AND PARKING
1. Turn the throttle grip away from you to
close the throttle completely.
2. Apply the front and rear brakes evenly
and at the same time.
3. Downshift through the gears as road
speed decreases.
4. Select neutral with the clutch lever
squeezed towards the grip (disengaged
position) just before the motorcycle
stops. Neutral position can be confirmed
by observing the neutral indicator lamp.
Inexperienced riders tend to underutilize
the front brake. This can cause
excessive stopping distance and lead to
a collision. Using only the front or rear
brake can cause skidding and loss of
control.
Apply both brakes evenly and at the
same time.
WARNING
Hard braking on wet, loose, rough, or
other slippery surfaces can cause wheel
skid and loss of control.
Brake lightly and with care on slippery
or irregular surfaces.
WARNING
Hard braking while turning may cause
wheel skid and loss of control.
Brake before you begin to turn.
WARNING
GT250‡»` 2008.7.18 4:13 PM ˘ ` 43 JINSUN 300DPI 100LPI W