HYOSUNG Comet 250 FI, Руководство пользователя

Страница: 60 / 78

59
2. After thoroughly washing the chain and
allowing it to dry, oil the links with a
Hyosung chain lube or an equivalent.
Some drive chain lubricants contain
solvents and additives which could
damage the “O-rings” in your chain.
Use
H y o s u n g
chain lube or an
equivalent that is specifically intended
for use with “O-rings” chains.
CAUTION
utilize front and rear disk
brakes.
Properly operating the brake systems are
vital to safe riding. Be sure to perform the
brake inspection requirements as
schedules.
The brakes should be inspected at
periodic inspection by your authorized
Hyosung dealer.
◉ ◉
BRAKE FLUID
Be sure to check the brake fluid level in
the master cylinder. If the level was found
to be lower than the lower mark while
holding the motorcycle upright, replenish
with the proper brake fluid that meets
Hyosung’s requirements.
As the brake pads wear, the fluid level will
drop to compensate for the new position of
barke pads.
Replenishing the master cylinder to
considered normal periodic maintenance.
LOWER
BRAKES
[Front Brake]
GT250‡»` 2008.7.18 4:13 PM ˘ ` 59 JINSUN 300DPI 100LPI W