14
Reading Data from Memory
11
Reading Data fr
om Memory
5. Measurement
The reader is now ready to start a measurement.
5.1 Direct Measurement
Press the button briefly. The display will show
RFID
or
TEST
. Proceed to 6.1.
5.2 Timer Measurement
If you want to start the measurement after a certain incubation time has
passed, press the button longer than 1 second. The display will show
RFID
or
TEST
, depending on your reader configuration. Each timer measurement
can be stopped by pressing the button during the measurement.
6. Test configuration data
There are different possibilities of test configuration data transmission
depending on the reader configuration.
6.1 Configuration data via RFID
Test configurations are uploaded via RFID before the measurement. Put
the lot specific RFID card onto the top side of the device or hold the device
against the RFID tag sticking on the test box until the configuration data has
been uploaded (audible signal).
