深圳市宏宇达数控技术有限公司
地址：深圳市南山区中山园路 1001 号 E4-6C(TCL 国际 E 城) TEL：755-26625800 FAX：755-26729960
-24-
4.2
、
The connection between XPTHC-4 and SF2012/SF2100 wiring
See Fig 4-2 shows :
Fig 4-2
：
XPTHC-4 to CNC Connection
Note
：
1
、
This is the direct connection to SF2012/SF2100
；
2
、
This CNC controller is without collision input, if you need the stop function when
collision, please according to SF instruction Fig 4-3 shows:
3
、
If use the PIN5 corner signal, please set the “P7” to “0” on THC
4
、
If for other SF CNC controller, please refer to its instruction’s I/O definition.
Fig 4-3: connection on the SF for the stop when collision
