Servicing 9
26
ST16135-00E
9.18 Servicing Requirements
The following preventive maintenance charts cover all Hydrovane
compressors using Hydrovane Fluid Force Red 2000, Clear and
HPO oils.
The work to be carried out must be done on or before the hours
shown for this action, or every 12 months, whichever is soonest.
Tables 9.1 for 2000 hour oil change periods and 9.2 for 4000 hour
oil change are shown in entirety, shaded items are Hydrovane
Distributor maintenance tasks only.
NOTE ! Certain items may not be applicable to all units.
READ HEALTH AND SAFETY PRECAUTIONS
BEFORE STARTING ANY WORK.
9.19 Service Schedule: Fluid Force Red, Clear
and HPO Oil
For normal ambient conditions bulk oil temperatures must not
exceed 90°C (100°C for HPO oil) when using 2000 hour oil
change periods.
In higher ambient conditions using 4000 hour oil change periods
HPO oil should not exceed 90°C. In extreme ambients HPO oil
should be used at the 2000 hour oil change periods.
If the oil is working above these temperatures the oil life will be
significantly reduced.
If changing to Fluid Force Clear flush the compressor with Fluid
Force Prime in order to comply with USDA H1 standard.
The service life of the air filter and cabinet filter are an indication
only, actual life durability will depend on the operating conditions.
9.20 Service Kits
Additional kits available for full product support are as follows:
Cabinet filter kit, 2000 hour/12 months, use KF457E, KF1122E or
KF3045E.
Solenoid valve kit, 8000 hour/4 year, use KSVDOL, KSVSD or
KSV3045E.
Contactor kit, non scheduled item, use KC457DOL, KC457ERS,
KC457ESD, KC1115E, KC15ERS, KC1822E, KC22ERS, KC30E,
KC30ERS, KC3745E or KC3745ERS.
Electrical kit, 20000 hour/10 year, use KE457EDOL, KE457ESD,
KE457ERS, KE1115E3, KE15ERS, KE1822E, KE22ERS,
KE30E, KE30ERS, KE3745E or KE3745ERS.
Wear sleeve kit, 20000 hour/10 year, use KW457E, KW1122E or
KW3045E.
Motor bearing kit, 20000 hour/10 year, use KBH132 (HV04),
KBV132 (HV05/07), KBV160 (HV11/15), KBV180 (HV18/22).
