manualshive.com logo in svg

Hydrotechnik 3402-CX10-D100-000, Руководство по эксплуатации, Страница: 8 / 48

Поделиться
Скачать
Hydrotechnik 3402-CX10-D100-000 Скачать руководство пользователя страница 8

BASICS 

 

 

 

 

 

  

      

 

 

 

HySense

®

 CX 197 

 

8 

 

ENG 

HYDROTECHNIK GmbH is not liable for lost profits and for consequential 
damages that arise from non-compliance with safety and warning information. 
HYDROTECHNIK GmbH accepts no liability for damage that results from the 
use of accessories and/or wearing parts that are not provided and/or approved 
by HYDROTECHNIK GmbH. 

 

In case of faults and/or technical trouble, please contact HYDROTECHNIK 
GmbH's customer service. HYDROTECHNIK GmbH assures you that it will take 
suitable measures immediately. HYDROTECHNIK GmbH’s warranty provisions 
apply; we will send you these on request. 
 

2.4  Intended use 

 

The service measuring kit handles the control and monitoring of the oil condition 
and the interval for oil changes in stationary and mobile hydraulic systems. The 
service measuring kit is to be used with hydraulic oils and Group 2 fluids 
according to classification of the pressure equipment directive 2014/68/EU 
(non-hazardous fluids). 

 

2.5  Warranty 

 

In accordance with our general terms and conditions, HYDROTECHNIK GmbH 
guarantees the perfect condition of the CX 197 for a period of twelve months. 
Wearing parts and rechargeable batteries are excluded from this warranty. The 
warranty is voided if repair work or interventions are executed by people who 
are not authorized for this by HYDROTECHNIK GmbH. 
 
Within the warranty period, we will repair damage or defects that are caused by 
a manufacturing fault insofar as they are reported to us immediately after their 
discovery, but no later than twelve months after delivery. The warranty service 
is done at our option through free repair of defective parts or replacement with 
sound parts. Please send the instruments for which you are making warranty 
claims postage-paid and with a copy of the invoice or the delivery slip to 
HYDROTECHNIK GmbH customer service. You can find the address at the end 
of this manual. 
 

2.6  Customer obligations 

 

The operator of the service measuring kit must ensure that only people who 
 

•

 

are familiar with the regulations concerning occupational safety and 
accident prevention, 

•

 

have been instructed in the operation of this measurement instrument, 

•

 

have read and understood this manual,  

 

are permitted to use and operate this instrument. 

 

Содержание 3402-CX10-D100-000

















































Отзывы:

Нет отзывов