USE WITH A MULTISYSTEM MEASUREMENT
INSTRUMENT
HySense
®
CX 197
35
ENG
If you select the oil type with the Enter key from the metering point selection on
the Edit menu (Figure 26 right), you reach the oil database that is depicted in
Figure 27.
Here, you can select a pre-defined oil (001-037) or create an oil with its
parameter starting with memory number 038. The oils 001-006 are common oils
of a brand. The oils starting with numbers 007 to 037 describe oil types with
their properties. Here, for example, the oil type with the number 009 describes
an HLP type (mineral oil) that contains zinc with the viscosity 22 mm
2
/s at 40°C.
If, starting with memory number 038, you use the F2 key (“EDIT”) to create your
own oil, you reach the menu depicted in Figure 28. Here, you define the oil
parameters:
Figure 26: left: Metering point selection: right: EDIT menu of the metering point
Figure 27: Oil database