Hydrotechnik 3402-CX10-D100-000 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

Hydrotechnik 3402-CX10-D100-000 Скачать руководство пользователя страница 7

BASICS

HySense

®

CX 197

7

ENG

2.

BASICS

2.1 Scope

This manual is valid for the service measuring kit HySense

®

CX 197 (called the

service measuring kit or CX 197 below). It is intended for the operator of this CX
197, that means the person who works with the instrument. This is not a
technical manual. Please contact our customer service if you have questions
that go beyond the contents of this manual.

2.2 Copyright

The instrument and this manual are protected by copyright. Reproduction
without license will be prosecuted. All rights to this manual are reserved; this
includes the reproduction and/or duplication in any conceivable form, e.g. by
photocopying, printing, on any data recording media or in translated form.
Reproduction of this manual is only permitted with written approval from
HYDROTECHNIK GmbH.

The technical state at the time of delivery of the instrument and the manual is
decisive if no other information is given. We reserve the right to make technical
changes without special announcement. Earlier manuals are no longer valid.
The general conditions of sale and delivery of HYDROTECHNIK GmbH are
valid.

2.3 Limitation of liability

We guarantee the faultless functioning of our product in accordance with our
advertising, the product information we publish, and this manual. Additional
product properties are not assured. We assume no liability for efficiency and
fault-free function if the product is used for a different purpose than the one
described in the Intended use section.

Compensation for damages is generally excluded except in case intention or
gross negligence on the part of HYDROTECHNIK GmbH is proven.

If this product is used in environments for which it is not suited or that do not
correspond to the technical standard, HYDROTECHNIK GmbH is not
responsible for the consequences. HYDROTECHNIK GmbH assumes no
liability for damage to installations and systems around the product that is
caused by a fault of the product or an error in this manual. HYDROTECHNIK
GmbH is not responsible for the violation of patents and/or other rights of third
persons outside the Federal Republic of Germany.

HYDROTECHNIK GmbH is not liable for damage that results from improper
operation and non-compliance with the instructions in this manual.

«
...
5
6
7
8
9
...
»

Содержание 3402-CX10-D100-000

















































Отзывы:

Нет отзывов