HYDROSCAND PowerCut 5-85ot, Руководство пользователя

Страница: 5 / 31

Page 5
PowerCut 5-85OT USER MANUAL EDITION II 2017-09-08
3. the equipment
Our stationary hose cutting machine is supplied ready to use packed on a pallet.
The machine is supplied with an electric cable but without plug and main switch. It’s the
customers responsibility to install the power supply according to present national
regulations. The manufacturer recommends a lockable main switch between the machine
and the mains. PowerCut 5-85OT is prepared with a smoke evacuation connection and if a
smoke evacuation is connected the manufacturer recommends to install a spark filter to
prevent hazards.
note !
The packing material must be disposed according to current environmental protecting re-
gulation.
the machine is supplied initially with:
• Cutting blade HSM 520x4x38 Toothed part No: 90050006.
• Locking tool for changing cutting blade.
• Instruction manual.
• Certificate regarding agreement according to CE-standards.
3.1 Warranty
The cutting machine is guaranteed for one (1) year following the date of purchase; the war-
ranty is valid only if all of the instructions listed on the warranty certificate and in this
manual are fully complied with.
NOTE !
When unpacking the cutting machine, make sure that the machine is in perfect condition
and that the package contains the parts described. hydroscand Machine Ab does not re-
spond for errors or missing parts not reported to hydroscand Machine Ab following eight
(8) days after shipment.
3.2 Important
The hose cutting machine is designed, manufactured and protected for cutting 1-, 2- ,4-
and 6-layers hydraulic hose with dimension from 3/16” up to 3”.
Any other use is excluded by hydroscand Macine Ab, who shall be exempt from any
liability for damage to people, property or the machine itself, caused by improper use. Do
not leave the cutting machine idle running for longer periods, without cutting anything.
Do not cut solid steel, wood or other unknown material, that can cause damage to
people, property or the machine itself.