Page 11
h24Ap/hp uSEr mAnuAL EdItIon I 2013-02-20
4.5 Changing die sets with the QC-tool
The QC-tool allows you to change entire die sets in just one step.
1.
Fully contract the dies together to zero (0). Insert the qc-tool in the holes for the
qc change tool in the contracted dies and then completely retract (return) the
dies. Insert the die set in its storage compartment (qc-rack or qc-stand) and turn
the tool counter-clockwise until it stops. remove the tool.
2.
completely retract the die set.
3.
Insert the qc-tool in the desired storage compartment and turn clock-wise until it
stops. pull out the die set and mount them in the machine.
4.
contract the dies together until they click in place.
