22 Hydro-Mix HT Mechanical Installation Guide HD0766 Rev 1.2.0
Clamp Ring
X (Max 32mm)
Figure 20: Positioning the Clamp Ring
4. Insert the sensor through the Fixing Plate and attach using the 4 screws.
5. Confirm that the sensor is flush with the internal wall. Adjust the Clamp Ring
position if the sensor is not flush.
Figure 21: Sensor Final Position
8.5.2
Flush Mounted Fixing Plate
1. When the Fixing Plate has been welded into position ensure that it is flush with the
internal surface (Figure 22).
Fixing Plate
Wall/Floor
Figure 22: Flush Mounted Fixing Plate
2. Attach the Clamp Ring with the Spacer Plates installed to the Hydro-Mix HT
3. Ensure the Spacer Plates are touching the ridge on the sensor (Figure 23). Tighten
the Clamp Ring Screws to lock the Clamp Ring into place
Содержание Hydro-Mix HT
