Hydromatic HPGLX200, Инструкция по установке и обслуживанию, Страница: 10 / 12

10
1 6461-010-5 Cord Cap Assy. 30' 1
6461-012-5 Cord Cap Assy. 50' 1
2 00101-007-1 Screw - Cap 2
3 00834-015-1 O-Ring S 1
4 10898-000-1 Connector 2
5 10898-000-1 Connector 4
10898-000-1 575/3/60; 200/3/60 3
10899-000-1 230/3/60 4
10899-000-1 460/3/60 6
6 04917-000-1 Lower Seal Seat S 1
7 00156-025-1 Flat Washer 1
8 00150-017-1 O-Ring S 1
9 10900-000-5 Seal Sensor Assy. 1
10 10901-001-1 Seal Failure Probe 2
11 00119-016-1 Pipe Plug w/Wire Holes 2
12 10902-001-3 Wire Safety Lock 1
13 00150-012-1 O-Ring S 1
14 00101-010-1 Capscrew (Hex) 4
15 00834-023-1 O-Ring S 1
16 05404-007-5 Seal Plate Assy. R 1
17 06463-000-2 Impeller 4.50" Dia. 1
06463-001-2 Impeller 4.25" Dia. 1
06463-008-2 Impeller 4.13" Dia. 1
06463-002-2 Impeller 4.00" Dia. 1
06463-003-2 Impeller 3.88" Dia. 1
06463-004-2 Impeller 3.75" Dia. 1
06463-005-2 Impeller 3.50" Dia. 1
06463-006-2 Impeller 3.25" Dia. 1
06463-007-2 Impeller 3.00" Dia. 1
18 00030-004-1 Machine Screw (Rd Hd) 3
19 05570-005-1 Impeller Washer 1
20 14885-000-1 Impeller Screw 1
21 05419-001-1 Roll Pin 1
22 04917-000-1 Lower Seal (Rotating) S 1
23 10957-000-2 Volute 1
24 00517-004-1 Screw - Socket 4
25 00975-002-1 Snap Ring 1
26 10956-100-2 Seal Housing 1
27 00300-000-1 Upper Seal S 1
28 00178-006-1 Screw - Socket 4
29 00145-010-1 Machine Screw 4
30 00177-001-1 Lock Washer 4
Ref. Part Part
No. No. Description Qty.
31 10823-003-1 Stator 2HP 230/460/3/60 1
10823-203-1 Stator 2HP 200/3/60 1
10823-603-1 Stator 2HP 575/3/60 1
10832-003-1 Stator 2HP 230/1/60 1
10832-203-1 Stator 2HP 200/1/60 1
32 10823-101-5 Rotor & Shaft Assy. 2HP 3f 1
10832-101-5 Rotor & Shaft Assy. 2HP 1f 1
33 13494-004-2 Motor Housing 1
34 00065-001-1 Upper Bearing R 1
35 00064-001-1 Wave Spring 1
36 00065-027-1 Lower Bearing R 1
37 04580-001-1 Drive Screw 4
38 13425-034-1 Nameplate 1
39 07763-000-1 Cutter Retaining Ring 1
40 05405-001-2 Radial Cutter R 1
41 05506-002-2 Axial Cutter R 1
42 05505-000-2 Cutter Ring R 1
51700-055-7 Seal Kit
51700-109-7 Rebuild Kit
Notes: S — Parts in Seal Kit. C — Parts in Carbide Seal Kit. I — Parts in Impeller Kit. R — Parts in Rebuild Kit. *Consult Factory
ORDERING REPLACEMENT PARTS: Product improvements are made from time to time. The latest part design will be furnished
as long as it is interchangeable with the old part.When ordering replacement parts, always furnish the following information:
(1) pump serial number, (2) pump model and size, (3) part description, (4) part number, (5) impeller diameter (if ordering impeller),
(6) quantity required, and (7) shipping instructions.
Ref. Part Part
No. No. Description Qty.
Ref. Part Part
No. No. Description Qty.
HPGLX200
Parts List
ORDERING REPLACEMENT PARTS
Product improvements are made from time to time. The latest part design will be furnished as long as it is
interchangeable with the old part.
When ordering replacement parts, always furnish the following information:
1. Pump serial number
5. Impeller diameter (if ordering impeller)
2. Pump model and size 6. Quantity required
3. Part description 7. Shipping instructions
4. Part number