HydroMassage Owner’s Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 27 of 33
HydroMassage
®
Touchscreen Features
1.
Massage Settings
. The following variables may be adjusted to provide a fully customized massage based
on user preferences. The default settings for each variable may be changed in the Administrator Menu.
a.
Pressure
. The massage intensity ranges from 2-38 PSI on a scale from 1-10. The current
pressure will be displayed in two ways: 1) The current pressure level is shown as a number directly
below the Pressure heading, and 2) the same number of pressure bars will be highlighted in blue
(Ex. If the pressure is set at level 8, then 8 bars will be highlighted in blue). To adjust the Pressure,
either press the Up or Down arrows, or simply press one of the ten bars. Pressure Seven shown.
b.
Speed
. There are four different speeds at which the jets travel up and down the body: Slow,
Medium, Fast, and Fastest. The current speed is displayed in two ways: 1) The current speed will
be shown as a number directly below the Speed heading, and 2) the same number of speed bars
will be highlighted in blue (Ex. If the Speed is set at level 2, then 2 bars will be highlighted in blue).
To adjust the Speed, either press the Speed Up or Down arrows, or press one of the four bars
directly.
c.
Limits
. The High and Low Limits allow the user to set their desired massage zone by indicating two
points along the body which the massage will stay between. The High Limit is the point that the
massage will not travel above on the body, and conversely, the Low Limit is the point that the
massage will not travel below on the body. To adjust the Limits, press the
↔
button next to the “1”
or “30” on the 1-30 scale then either slide the massage limit to the right or left, or touch the new
desired limit, and the button will move to that location. The massage will be performed between the
two settings. An example of massaging between 10 -20 is shown.
d.
Time
. The length of the massage may be set for a period of time ranging from 1-60 minutes, in 1
minute increments. The length of the massage may
only
be changed prior to beginning the
massage session. Once the massage begins, the clock will display the remaining massage time. To
adjust the Time before beginning the massage, press either the Up or Down arrows directly to the
right of the clock. To change the default time, see “Adjusting Defaults” under Advanced Features.