Hydro-Force AR51A, Руководство пользователя

Страница: 3 / 19

3
Model AR51S SX-15 Tile Cleaning Head:
Cleaning Head: Width: 15 inches, Height: 3.13” w/ Hard Boot & 3.50” w/ Brush Ring
Weight: 7.9 lbs.
Shell Construction: Glass Reinforced Nylon
Handle Adapter: Nickel Plated Aluminum
Hard Boot: HDPE
Brush Bristles: Nylon
Maximum Solution Pressure: 2500psi
Minimum Solution Pressure: 700psi
Model AR51A Gekko Tool Handle:
Length: 49.75” to Vac Hose Connection / 57.5” to top of Spray Gun
Weight: 6.6 lbs.
Handle Construction: Stainless Steel
Coupler: Nickel Plated Aluminum
SX-15 MAI NTENANCE
Your SX-15 requires very little maintenance. To keep your SX-15 looking and working its best
for the longest period of use:
After each use rinse the Inner Shell of the SX-15 to remove accumulated dirt & debris. The Inner
Shell can be separated from the Outer Shell to clean the air flow channel between the two shells.
(See instructions for changing the Hard Boot & Brush Ring for procedure to separate Outer and
Inner Shells on Pages 5-7.)
Rinse & wipe down top of head assembly & handle.
Rinse & wipe clean the Brush Ring if used.
Examine the Brush Ring – Replace Brush ring if bristles are excessively bent, worn or if too
many bristles are missing.
Check and clean the stainless steel mesh filter between the quick connect and valve to
prevent a reduction in water flow and tool efficiency. See item NA0803 in the parts diagram on
Page 16.
Check the spray pattern of the jets and clean or replace the jets as needed to assure even
spray pattern.
Check solution hoses for wear or damage. Replace Solution hoses as needed.
Check vacuum hose for holes or cracks. Replace Vacuum hose as needed.
SPECIFICATIONS