HydrINS 2 / HydrINS 2 Mini flow meter
User Manual
Page 50 / 79
Route the cable using the cable gland, and then fasten the various wires to the pulse connector
according to the correspondence table below:
Terminal block designation (output)
Function
Com Frq
Pulse output common
Frq Out 1
Frequency output (normal direction)
Freq Out 2
Frequency output reverse direction or direction
Table 5: Connection of pulse outputs – Terminal block designation – Output
Reconnect the connector and retighten the cable gland.
If the cable has a braid, it can be connected to the
Screen
terminal of the connector in case of
electrical interference.
8.9.3
Wiring the 4-20 mA outputs to the terminal block of Display C
Figure 38: Location of the 4-20 mA outputs (Display C)