3-2 - Tool Maintenance
4.
Slide the clear window cover off of the tool
body.
5.
To reinstall the clear window, slide it into one
half of the tool body (Figure 3-5). Then slide the
other half of the body onto the window.
Note: The clear window has grooves on either side
that slide onto the edges of the cutouts in the
tool bodies.
The wear plates must be aligned and slid onto the tool half at the same time as the
cover.
The window cover may come out if not installed properly.
6.
Continue to assemble the two halves of the tool together, with the clear window
being captured in the cutouts. Careful attention must be paid when sliding the two
body halves together.
7.
Reinstall the screws using Loctite® 222.
Figure 3-5. Reinstall Clear
Window Cover
Window Cover
