background image

HydraMaster Corporation

Page 1-4: General Information

Boxxer H

2

O

HOT SURFACES:

  During the operation of this equipment, many surfaces on the machine

will become very hot.  When near the van for any reason care must be taken not to touch
any hot surface, such as blower, engine, exhaust, etc.

HEARING PROTECTION:  

The Occupational Safety and Health Administration (OSHA)

recommends the use of hearing protection when a technician is exposed to an 

average

 of

85 decibels (this is an average of exposure over an 8 hour period).  This equipment can
produce 85 decibels to a distance of 10 feet.  Please check with your local state agencies
to see if OSHA standards apply to your application.

NO SMOKING:

 

 

It is unsafe to smoke in or around the vehicle.

CARBON MONOXIDE:

 

 

This unit generates toxic fumes.  Position the vehicle so that the

fumes will be directed 

away

 from the job site. 

 Do not park where exhaust fumes can enter

a building through open doors, windows, air conditioning units or kitchen fans.

TOXIC FUMES: 

 Do not occupy the vehicle when the cleaning equipment is operating.

Toxic fumes may accumulate inside a stationary vehicle.

ENGINE EXHAUST: 

 The engine exhaust from this product contains chemicals known to

the State of California to cause cancer, birth defects or other reproductive harm.

PORTABLE GAS TANK:

  Never operate this machine with a portable gas can inside the

truck.  Doing so increases the risk of a fire or explosion.

TRANSPORTATION OF FUEL CONTAINERS:

  Transportation in a vehicle of any vented

fuel container that presently has or has ever contained a flammable liquid is strictly forbid-
den by HydraMaster Corporation and by federal and state regulation.

Содержание Boxxer H2O































































Отзывы: