HydraMaster Boxxer 427 Скачать руководство пользователя страница 137

Страница: 137 / 170

Boxxer 427

Page 8-1

HydraMaster Corporation

Vacuum System

Boxxer 427
Section 8-1

he vacuum pump in this machine is commonly referred to as a ‘positive dis-

placement lobe’ type blower. The performance and life of this unit is greatly

dependent on the care and proper maintenance it receives.

Because of the close tolerances between the lobes and housing of the vacuum blower,

solid objects entering the inlet will damage the internal lobes, gears, bearings or drive

system.

To prevent this, a stainless steel filter screen has been placed at the vacuum inlet

inside the vacuum recovery tank. This stainless steel screen is ‘finger’ tight and

should be removed for cleaning weekly.

Caution should be used when machine is being run for test purposes and the

vacuum inlet on top of the machine is open.

To protect the vacuum blower from overloading and damaging itself, there is a vacuum

relief system installed on the vacuum tank. When the vacuum tank inlet is completely

sealed off, a maximum of 12 HG will be attained.

At the end of each day, an oil based lubricant should be sprayed into the blower

lubrication port before shutting down the machine. Lubricate the vacuum blower

daily

to prevent rust deposits and moisture that will decrease the life of the vacuum blower.

Foam passing through the blower could lead to serious problems.

It is important to keep the vacuum tank foam free.

Read the vacuum blower manual carefully for proper oil change and grease applica-

tion. The maintenance log may differ slightly from the manual, but the truck-mounted

carpet cleaning machine application is very demanding of the vacuum blower and

therefore it should be maintained more regularly.

CAUTION

Содержание Boxxer 427











































































































































































Результаты поиска

Содержание Boxxer 427

Отзывы:

HydraMaster Boxxer 427, Руководство пользователя, Страница: 137 / 170

Результаты поиска

Содержание Boxxer 427

Отзывы: