HydraMaster Boxxer 427 Скачать руководство пользователя страница 100

Страница: 100 / 170

Boxxer 427

Page 3-1

HydraMaster Corporation

Operating Instructions

Boxxer 427
Section 3-1

START UP

1. Perform daily and periodic maintenance as specified in this Owner’s Manual.
2. Connect all required hoses, including a garden hose for water supply.
3. Connect the cleaning tool to the length of hose required to perform

the cleaning.

Water box must be full prior to ignition.

The machine cannot be

run

in the “IDLE” position for cleaning upholstery, carpet or

floor extraction. This will void the warranty.

NOTE:

In order to achieve consistent adjustable temperatures, an operating pressure

of 200 PSI must be maintained.

Note: Never run machine on any speed other than full throttle. Running at any

other speed will void the warranty.

Carpet or Hard Surface Cleaning

Start the engine with throttle cable in “

IDLE

” position.

Allow machine to run in idle for

2 - 3 minutes to warm up.

Connect hoses.

Connect wand or tool.

Pull THROTTLE to

“HIGH” position

If used, turn PUMP IN switch to

“ON”

Turn PUMP switch to

“ON”

Turn DIVERTER switch to

“ON”

Set temperature to desired level.

If used, turn PUMP OUT switch to

“ON”

WARNING

CAUTION

Содержание Boxxer 427











































































































































































Результаты поиска

Содержание Boxxer 427

Отзывы:

Бренды по названию

Популярные бренды

HydraMaster Boxxer 427, Руководство пользователя

Результаты поиска

Содержание Boxxer 427

Отзывы:

Бренды по названию

Популярные бренды