HydraMaster Boxxer 427 Скачать руководство пользователя страница 13

Страница: 13 / 170

Boxxer 427

Page 1-3

HydraMaster Corporation

Precautions

lthough this unit has been factory adjusted, it may require additional adjustments

to achieve optimum performance, for instance altitude may require carburetor

adjustment and ambient temperatures may require heat control adjustment. When

required, consult an authorized representative.

THROUGH-FLOOR DRILLING:

Be cautious when drilling holes through the van

floor. Many vans have critical components mounted directly below the van floor

that could be damaged by a misplaced drill bit. (See Product Support Bulletins

92102, 94062 and 94063 at the end of the manual.)

ENGINE COOLING:

Units employing internal combustion engines must not be

enclosed within a van with doors and windows closed. Excessive temperatures

within the engine will result in premature engine failure and a compromise of

applicable warranty.

LEVEL OPERATION:

During operation, van or trailer must be parked on level

ground not to or - 10 degrees. Failure to insure proper leveling may

prevent proper internal lubrication of engine, vacuum and/or high pressure com-

ponents.

MOVING PARTS:

Never touch any part of the machine that is in motion. Severe

bodily injury may result.

The machine cannot be run in the IDLE position for cleaning upholstery, carpet or

floor extraction. This will void the warranty.

WARNING

CAUTION

WARNING

Содержание Boxxer 427











































































































































































Результаты поиска

Содержание Boxxer 427

Отзывы:

Похожие инструкции для Boxxer 427

Бренды по названию

Популярные бренды

HydraMaster Boxxer 427, Руководство пользователя

Результаты поиска

Содержание Boxxer 427

Отзывы:

Похожие инструкции для Boxxer 427

Бренды по названию

Популярные бренды