background image

MRF7 

Safety information and instructions

 

Explanation of Symbols and Warnings, etc. 

The following designations and symbols are used in this manual to designate 
hazards, etc.: 

 

 DANGER 

DANGER denotes situations 
which can lead to death if 
safety precautions are not 
observed. 

 

 

 

 WARNING 

WARNING denotes situations 
which can lead to death if 
safety precautions are not 
observed. 

 

 

 

 CAUTION 

CAUTION denotes situations 
which can lead to severe 
injuries if safety precautions 
are not observed. 

 

 

NOTICE 

NOTICE denotes situations 
which can lead to property 
damage if safety precautions 
are not observed. 

 

Proper/Designated Use 

The MultiRheo Filter MRF is a stationary filtration unit used for full-flow or bypass 
filtration of low-viscosity fluids. 

Proper or designated use of the product extends to the following: 

  Maintaining adherence to all the instructions contained herein. 

  Performing requisite inspection and maintenance work. 

 

Improper Use or Use Deviating from Intended Use 

Improper use may result in hazards. 

Example of improper use: 

  Improper connection of the pressure and return flow hoses and oil leakage pipe. 

  Noncompliance with the restrictions on use 

 

HYDAC FILTER SYSTEMS GMBH 

en(us) 

Page 9 / 32

MoWa MRF7 3635531 en-us 2011-05-25.doc 

2010-05-25

 

Содержание MRF7

































Отзывы: