Hydac MRF7, Инструкция по установке и обслуживанию

Страница: 23 / 32

MRF7 Starting up the MRF
Starting up the MRF
The MultiRheo Filter is supplied ex works without any filter elements installed.
Prior to commissioning, insert all filter elements into the filter housing. Proceed as
described on page 24 in the chapter "Replacing the filter elements".
Before commissioning, fill and bleed a filter housing in accordance with the
description on page
Fehler! Textmarke nicht definiert. .
Performing maintenance
WARNING
Operating Pressure
Danger of bodily injury
► The hydraulic system must be depressurized
before performing any work on the hydraulic
system
The MRF is optionally supplied with an electric pressure gauge. This indicates when
the filter element change is required.
Once the dirt holding capacity of the filter elements has been reached, the clogging
indicator responds.
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 23 / 32
MoWa MRF7 3635531 en-us 2011-05-25.doc 2010-05-25