Hydac FMM-O-M Series, Инструкция по установке и обслуживанию

Страница: 14 / 32

Storing the FMM
FMM-O-M en(us) Page 14 / 32
MoWa FMM-O-M 3874983 en(us) 2013-09-16.doc 2013-09-16
Storing the FMM
Store the FMM in a clean, dry place, in the original packing if possible. Do not
remove the packing until you are ready to install the unit.
Always store the FMM in a horizontal or vertical position on the block, without
its original packaging.
Drain the FMM completely before putting it into storage. If necessary, rinse
the FMM with n-heptane to prevent it from gumming up during storage.
Decoding the model code label
For product identification details of the ConditionSensor see the Model code
label. This is located on the back of the unit and contains the exact product
description and the serial number.
Row -> Description
Model -> Model code; for details, see page 29
P/N -> Part no.
S/N -> Serial no.
Date -> Year/week of production and hardware index
Min. INLET press.: -> Minimum operating pressure
Max. INLET press.: -> Maximum operating pressure